Characteristics of air shower room
Equipped with centrifugal fan and medium and high efficiency air filter, easy maintenance and easy operation.
_2. The common type of air shower plate is made of a series of 50mm thick sandwich color steel plates and matching aluminum profiles, which are characterized by low cost and the same material as the purifying chamber and have a good overall feeling. The higher grade is made of 1.2mm thick cold rolled steel plate and matching profiles. The surface of the air shower chamber is made of electrostatic spraying, which is beautiful and modern. The inner wall and door can also be made of stainless steel. The effect is more luxurious. Advanced stainless steel manufacturing, door for induction automatic door, operating system using intelligent program PLC control system, for modern advanced enterprises preferred products.
Product Description:
In order to reduce the amount of dust particles caused by the entry and exit of personnel, the clean air flow filtered by the high-efficiency filter is sprayed from all directions by a rotary nozzle to the person, effectively and rapidly removing dust particles, and the dust particles are then filtered by the primary and high-efficiency filters and re-circulated to the air shower area.
1. purification level: static 1000 level;
2. The overall material of the box is A3 cold-rolled steel plate with multi-layer pickling and electrostatic spraying, and the inner bottom plate is made of stainless steel plate for abrasion resistance and easy cleaning.
3, there is a separator high efficiency filter, the filtration efficiency is 99.99%@0.5um, to ensure the purification level.
4. Fully automatic infrared induction shower, imported AUTOnise infrared sensor, Zhengtai intermediate relay, soft-key touch-type time relay, LED display and setting shower time, the range is 0-99s adjustable, two doors automatically lock when blowing; usually only one door can be opened, from the entrance into the clean area after infrared induction automatic blowing When it is out of the clean area, it can save energy by passing through the air shower room without blowing.
Fifth, with multi-angle adjustable stainless steel nozzle, left and right sides of the spray, embedded installation; external rotor large wind volume low noise fan, surface wind speed is greater than 20m/s, to ensure that the wind can be blown to the goods up to 18m/s, in line with national standards;
6. Use liquid crystal time display, air shower time is 0 ~ 99S adjustable, and show that the wind has been drenched time.
7, power supply: 3N, 380V, 50HZ, 1.1KW;
9, install high-tech humanized intelligent voice prompt system.
10. When the product is released from factory, it is manufactured according to the federal standard 209E, and the reliability is high.
FLS-JH series air shower room and air shower channel have new optional ways.
1, photoelectric induction automatic function system, adjustable door opening time.
2, automatic identification function system (with readable sensor card).
3, automatic ozone sterilization function system.
4, automatic removal of electrostatic ion generation function system.
5. Adjustable delayed door opening function system (in order to prevent dust from flying to the clean area after blowing, after blowing, the door can be opened into the clean area after a predetermined time. Set the time to open the door before entering the clean area.